WHEEL CYLINDER 34A-30-11401 for Komatsu & Allis-chalmers, Linde

Wheel Cylinder 34A-30-11401 for Komatsu & Allis-Chalmers, Linde

Category: Wheel Cylinders

Product Description

The Wheel Cylinder 34A-30-11401 is a key component in the braking system of forklifts and industrial machinery. It is designed for use in Komatsu, Allis-Chalmers, and Linde equipment, ensuring smooth and efficient brake operation.

This wheel cylinder plays a critical role in hydraulic braking. When pressure is applied to the brake fluid, the wheel cylinder pushes the brake shoes against the drum, allowing the forklift to slow down or stop effectively. A well-functioning wheel cylinder helps maintain braking efficiency, ensuring safety in material handling operations.

Product Specifications

Wheel Cylinder for Komatsu & Allis-Chalmers, Linde

Signs of a Faulty or Damaged Wheel Cylinder

• Spongy or Soft Brake Pedal: When you press the brake pedal, it feels soft, mushy, or like it's going further down than usual. You should pump the pedal to get any response.

• Brake Fluid Leaks: You might see puddles of brake fluid under the forklift, especially near the wheels. You might also see dampness or a thin fluid film on the wheel cylinder or nearby components.

• Uneven Brake Wear: When you inspect the brake shoes or pads, you might notice they are worn unevenly. One side might be more worn than the other.  

• Excessive Brake Pedal Travel: The brake pedal must be pressed further down than usual before the brakes engage.

• Grinding or Squealing Noises: You might hear unusual noises when you apply the brakes.

Recommended Use/Applications

This is the primary application. The 34A-30-11401 wheel cylinder is designed to be a component in the braking system of specific forklifts.

Specific Forklift Brands and Models

• Komatsu: This wheel cylinder is most commonly associated with Komatsu forklifts. It's likely used in a range of their models, including internal combustion (IC) and electric forklifts.

• Allis-Chalmers: While Allis-Chalmers is a discontinued brand, this cylinder might still be found in older Allis-Chalmers forklifts that are still in service.

• Linde: Linde is another major forklift manufacturer, and this wheel cylinder might also be compatible with some of their models.

Frequently Asked Questions

What is the 34A-30-11401 Wheel Cylinder Used For?

This wheel cylinder is a braking system component in certain Komatsu, Allis-Chalmers, and Linde forklifts. It converts hydraulic pressure into mechanical force to actuate the brake shoes.

Which Forklift Models are This Wheel Cylinder Compatible With?

While commonly found in Komatsu, Allis-Chalmers, and Linde forklifts, compatibility depends on the specific model and year. Consult your forklift's service manual or have a parts specialist confirm.

How Can I Determine if This Wheel Cylinder is Right For My Forklift?

The best way is to check your forklift's parts manual or contact a Komatsu, Allis-Chalmers, or Linde dealer or parts specialist. Provide them with your forklift's model and serial number for accurate identification.

Can I use This Wheel Cylinder on any Forklift?

No. This wheel cylinder is designed for specific forklift models. Using it on an incompatible forklift could lead to brake failure and serious injury.

What Happens if My Wheel Cylinder Fails?

A faulty wheel cylinder can lead to reduced braking power, uneven braking, brake fluid leaks, and a spongy brake pedal. This can create a dangerous situation.

Frequently Bought Together

Are you looking to buy more products related to this wheel cylinder? Here are some additional options available on Sourcefy that complement this product perfectly:

• Komatsu Strobe Light KO 3EA-56-F1211 for Komatsu & Allis-chalmers

• 22710-FU460: Switching - Mod For Komatsu & Allis-chalmers

• POWER STEERING O/H KIT ON43001-07567 for KOMATSU

• MASTER CYLINDER 34A-36-11400R